w w w . i - n e i g h b o u r . c o m
Note:
• To stop the control of TimeTec Barrier Gate Control Relay Board, you need to shut
down its power source.
• You can still control the gate operations by using a remote control or through the
physical open-stop-close buttons.
Step 1
Connect a 12V DC 3A power source to the power input port of TimeTec
Auto Gate Control Relay. DO NOT SWITCH ON the power until all the wiring
works are done.
Step 2
Connect Open, Stop and Close relays (NO and COM) to the corresponding
relay inputs into your auto gate control panel. You can use NC and COM from
TimeTec Auto Gate Control Relay if your auto gate control panel is using NC
and COM as well. Ignore the Stop relays if it is irrelevant.
Step 3
Turn on the power of the TimeTec Barrier Gate Control Relay, barrier gates
and all their components.
Step 4
Sign in to i-Neighbour web portal to complete the setup and configuration.
