Installation Guide
©
2018 Timetec Cloud Sdn Bhd. All rights reserved • 062018
w w w . t i m e t e c s e c u r i t y. c o m
TimeTec BLE-16
Smart Lift Controller
RECOMMENDATIONS:
•
Install the device inside a lift car, near to the
fl
oor button controller to
minimize the need of extra wiring.
•
Install an on/off switch to turn off the power supply to the device.
Power off to bypass the device, and the
fl
oor access function will be
back to default operation, where user can press button at the lift
button panel to access its desired
fl
oors.
•
For a building with more than 16
fl
oors, the installation requires more
than one BLE16 relay boards. For example, a building with 30
fl
oors
will need 2 units of BLE 16 relay boards, where the
fi
rst relay board will
control access from Floor 1 to Floor 16, and the second relay board
will control the access from Floor 17 onwards until Floor 30.
Below is a list of accessories that are necessary to install
TimeTec BLE-16
PW12V Switching Power Supply
AC/DC switching power supply to keep the
battery charged during daily operation
and also allows it to function during a
power failure as well.
TimeTec BLE-16
STEP • 2
Make sure
that you have
all the required
accessories
for the
installation
STEP • 1
Determine
where you
want to install
TimeTec
BLE-16
The User Guide for TimeTec Security App can be
obtained in the App or in our website at
www.timetecsecurity.com
iOS Android
Floor button
control panel
LIFT
1
2
3
4
5
6
7
8
9
10 11 12
TimeTec Lift
Control Panel
BLE-16
