70
GSENSOR
Timespace XP200 Accelerometer settings menu.
The XP200 is a GSensor device that provides X, Y and Z axes data to the X300 via the serial port. Data
is displayed and recorded into each image along with optional GPS data.
GSensor readings are displayed for;
BRAKE
- Measurement of decreasing forward motion.
ACC
- Measurement of increasing forward motion.
LAT
- Measurement of lateral movement.
UP
- Measurement of upwards motion.
RESET READINGS
- Clears all current readings within this hour.
RESET ALARM
- Clears the alarm condition.
Within the GSensor setup menu the connection status is shown as well as the communication baud
rate. The baud rate can be changed here but must match the GPS baud rate (if using GPS).
GSensor threshold triggers can be configured from 0.1 - 2.0. If the set value is exceeded an alarm can
be raised (used in conjunction with alarm outputs). A link to both the Alarm input and output menu gives
quick access to configure the required action.
Summary of Contents for X300 Series
Page 18: ...18 X300 DIGITAL RECORDER...