background image

1OPK$CUG +PUVTWEVKQP /CPWCN

Timespace Technology Ltd, 89 High St, Huntingdon PE29 3DP, England
Tel:  +44 (0) 1480 414147, Fax: +44 (0) 1480 414146, Email: [email protected]

TIMESPACE TECHNOLOGY LTD (TIMESPACE) guarantees this product to be free of defects
in material and workmanship for a period of 1 year from the date of end-user purchase.

During the warranty period TIMESPACE shall, at its sole and absolute option, without charge for
labour or parts, either repair or replace any product that proves to be defective on inspection by
TIMESPACE or, outside the UK and EIRE, the authorised service representative.

In the event of a claim under guarantee:

(1) UK / EIRE

Contact TIMESPACE at the location below with a description of the fault and the product serial
number.  After receiving a return authorization number the product must be sent to TIMESPACE,
carefully packed (if possible in original packaging), carriage prepaid, insured and with a copy of the
original invoice / receipt issued on purchase.  TIMESPACE reserves the right to update any unit
returned for repair.  TIMESPACE reserves the right to change or improve the design of the product
at any time without prior notice.

(2) Outside UK / EIRE

Follow the instructions of the local distributor.

This guarantee does not cover claims for damage due to abuse, neglect, alteration or attempted
repair by unauthorised personnel and is limited to failures arising during normal indoor use that are
due to defects in material or workmanship in the product.

In no event will TIMESPACE be liable for incidental, consequential or other damages resulting
from the breach of any express or implied guarantee of this product. 

This guarantee does not affect the consumer's statutory rights under applicable national legislation
in force, nor the consumer's rights against the seller arising from their sales / purchase contract.  In
the absence of applicable national legislation, this guarantee will be the consumer's sole and
exclusive remedy.

)WCTCPVGG

l  4'8+5+10

8C

1OPK$CUG

&KIKVCN8KFGQ4GEQTFGT

+PUVTWEVKQP/CPWCN

Summary of Contents for OmniBase 8































Reviews: