5
Alternate mounting holes
Wall plate retaining screws
Retaining tabs
Mounting
holes
Transmitter
5.9 Remove the wall plate from the transmitter unit, by undoing the
retaining screws, and pivoting the bottom of the unit outwards.
The TRT047N transmitter body can then be lifted off.
5.10 Mark the position of the mounting holes on the wall using the wall plate
as a template. Drill out the mounting holes taking care to avoid any
joists, electrical cables or water/gas pipes that may be hidden beneath
the surface. Insert the rawl plugs into the holes.
5.11 Fix the wall plate to the wall using the correct mounting screws for the
rawl plugs installed. The retaining screws which secure the unit to the
wall plate should be at the bottom.
5.12 To insert batteries into the unit, first lower hinged flip down cover and
carefully lever the battery holder cover off. Insert the 2x AA batteries
supplied into the battery holder maintaining the correct polarity,
as shown in the base of the battery holder. Re-position the battery holder
cover and click into place.
5.13 To reinstall the unit onto the wall plate, first ensure the wall plate
retaining screws are loosened enough to clear the TRT047N transmitter
body, then engage the top of the TRT047N transmitter onto the wall
plate retaining tabs, and push firmly downwards and then upwards.
There will be some resistance from the terminals.
5.14 Once in place, secure with the retaining screws making sure
not to over tighten.
Transmitter Wall Plate
