12
10.12 From the main screen, press and hold the Set button for 3 seconds, so
the day of the week is flashing e.g. Mon (or if you are already in the
programming screen, press Set once so the day flashes).
The day of the week
will flash e.g. Mon
Press and hold the
Set button for 3
seconds
Note:
• If no button is pressed, it will time out after 60 seconds and return to the
mains screen showing day, time and output status.
• The display light will also time out after 15 seconds after the last button
is pressed.
• All 3 time controlled periods will need to be Programmed, unwanted times
need to be entered as the same time i.e. P2 ON 7:00AM, P2 OFF 7:00AM.
P3 ON 7:00AM, P3 OFF 7:00AM.
• Unwanted days of the week need to be entered as the same time i.e. Wed
P1-P2-P3 ON 7:00AM, P1-P2-P3 OFF 7:00AM. Thu P1-P2-P3 ON 7:00AM,
P1-P2-P3 OFF 7:00AM etc.
• The Set button can be pressed twice to exit the programme entry
at any stage.
Copy Function
Note:
• The copy function can only be used after you have programmed at least
one day, for both channels.
• You cannot copy programs for individual channels i.e. if you have different
program set for heating and hot water for Mon for example, both
programs for each channel will get copied to the day of your selection
at the same time, they cannot be split.
