1
1. General Information
These instructions should be read carefully and retained for further reference
and maintenance.
2. Safety
• Before installation or maintenance, ensure the mains supply to the PIR
sensor is switched off and the circuit supply fuses are removed or the
circuit breaker turned off.
• It is recommended that a qualified electrician is consulted or used for the
installation of this PIR sensor and install in accordance with the current
IEE wiring and Building Regulations.
• Check that the total load on the circuit including when this PIR sensor
is fitted does not exceed the rating of the circuit cable, fuse or circuit breaker.
3. Technical Specifications
• 230V AC 50 Hz
• This PIR sensor is of Class II Construction and must not be earthed
• Detection Range:
Up to 12m at a 2.5m mounting height
• Detection Angle:
180°
• Maximum Switching Load:
2300W Halogen Lighting
500W Fluorescent and LED Lighting
• Time ON Adjustment:
2 seconds to 30 minutes
• Warm Up Time:
30 seconds
• Lux Adjustment:
2 to 1000 lux
• Operating Temperature:
-25°C to +45°C
• Manual Override:
Double pulse within 2 seconds,
to enter 6 hours ON time (night time only).
• Back Box Mounting Centres: 60mm
• IP55 Rated suitable for restricted external applications
• CE Compliant
• Dimensions (H x W x D):
81.8 x 81.8 x 67.1mm
