Page 8 of 8
Stage
9
Push x2 Mattress Stoppers (8) into metal frame, they should go all the
way through the upper & lower metal sections.
8
NOTE
: Before moving the slat frame, place the mattress on the slats. Without a mattress in place, the speed of movement
is quick and may cause injury. Carefully lower the frame with the hand-strap ensuring the frame sides are aligned with the
side panels; there should be an even gap on each side. If not aligned, check bed is still square (see Stage 2) and if it is, but
gaps are still not even, re-align as in Stage 7.
Depending on the weight of the mattress, the rising speed will vary so be careful until you get used to the speed. Always
use the strap to lift or lower the frame - keep fingers well away from the moving parts.
When fully assembled and the mattress in position, please raise & lower the ottoman 4/5 times to
ensure the gas pistons are fully lubricated.