5
Using Your Ice Shaver
CAUTION: Your Avalanche Ice Shaver has a sharp, stainless steel blade
that can cut and cause serious injury. Keep fingers clear from blades and
avoid contact at all times when using and cleaning.
Before using for the first time, and following periods of prolonged storage,
remove the top cover by pressing the latch on the back and lifting the top
cover forward. Wash in warm, soapy water, rinse and dry. Do not put in a
dishwasher.
Use a damp cloth to wipe down the inside and outside of the ice hopper
and motor base. USE EXTREME CAUTION AS BLADE IS VERY
SHARP. DO NOT POUR WATER INTO ICE HOPPER!
When assembling, dismantling, or cleaning, always ensure that the appliance
is not connected to the power supply.
To make fluffy shave ice style snow, the quality of ice is very important. Ice
should be firm and directly from the freezer with no liquid water on it. Wet
ice will produce a wet slush output, not snow. For best results keep ice in a
freezer until immediately before shaving.
•
Lift open Ice Door and place ice cubes into ice hopper. Tip: Shaves ice
faster when ice hopper is full.
•
Connect power cord to outlet.
•
Place container of your choice underneath the blade to catch ice as it is
shaved.
•
Close Ice Door and press down in center of Ice Door.
•
Ice will begin shaving into container, stop pressing down when the
desired amount is reached.
•
Add your favorite Time for Treats Premium Syrup, soft drink, or fresh
fruit to the shaved ice and enjoy.
•
Unplug from power supply immediately after use.
•
After shaving, there will always be a small amount of ice remaining in
the Ice Hopper. Remove lid by pressing down the white button marked
“PUSH” on the back of the Ice Shaver while lifting lid up and toward
the front. The ice should be discarded and the Ice Shaver dried with a
soft cloth.
Summary of Contents for AVALANCHE VKP1150
Page 1: ...Instruction Manual...
