Ficha Técnica
|
Carte Technique
|
Technical Card
TIM -
Timblau se reserva el derecho a la revisión unilateral de esta ficha técnica en cualquier momento
Timblau se réserve le droit de réviser unilatéralement cette carte technique à tout moment.
Timblau reserves the right to unilaterally review this technical card at any time.
021099
EN
Wall Fixer Hand Dryer
•
Automatic hand dryer. Without brushes.
ABS white. Power 1850W. Voltage: 220V
Installation
•
With included screws and wall plugs (4).
Maintenance and cleaning
•
Maintenance:
Maintenance work must
be carried out by qualified personnel,
electricians or maintenance technicians.
At least 2 times a year the housing must
be removed and dust and other dirt and
particles that may have been stuck inside
the dryer must be removed. It is especially
important to remove debris and impurities
that may affect the motor’s axis of rotation
as well as in the area where the heat
resistance is located. Keep it unplugged
from the network during long periods of
inactivity.
•
Housing:
Clean the housing with a soft
cloth. If it is very dirty, clean it with a cloth
and neutral non-abrasive products such
as aqueous soap solutions. Then dry.
The surfaces of the device must always
be carefully dried. Dry the joints between
parts and moving parts carefully.
•
Drain pan:
Empty and clean the drain pan
at least once a week to avoid odor and
other problems.
COMPLY WITH THE FOLLOWING STANDARDS
EN 60335-2-23:2003 + A1:2008 + A11:2010 + A2:2015
EN 60335-1:2012 + A11:2014
EN 62233:2008
