© 2008 Timberline Tool All Rights Reserved.
Make sure the
Slap-On Jaw
matches
the diameter and SDR of the pipe to be
squeezed-off.
(Fig 5)
5. Attach
the
Slap-On Jaw
.
(Fig 6)
6. Attach both cables to the
Fixed Jaw
.
(Fig 7)
The tool can be operated with the
Ratchet Handle
and
Top Hex Head Extension
only.
(Fig 8)
7. If you need more length add the
Bottom Extensions
.
(Fig 9)
OPERATING PROCEDURE
Remember this is only a recommended pro-
cedure for a safe and effective squeeze-off.
Always follow your speci
fi
c company safety
rules when working around natural gas.
1. Ground the tool with the
grounding rod
.
2. Open the TR650 just enough to
fi
t over the pipe. The
cables will not be tight.
(Fig 10)
If the cables are tightened and the
clamp is dropped on the pipe the
cables will break.
3. Make sure the pipe clear of any debris (rock, dirt, etc).
4. Remove
the
Ratchet Handle
- turn it over so that “CLOSE” is up.
(Fig 11)
5. Reattach
the
Ratchet Handle
with the pin.
(Fig 12).
8
Fig 8
m Extensions
.
Fig 5
Fig 6
Fig 7
9)
Fig 9
Fig 10
Fig 11
Fig 12
