© 2008 Timberline Tool All Rights Reserved.
10
ACCESSORIES
Any accessories or attachments recommended for use with your
Timberline Tool are speci
fi
ed in this manual. The use of any other
accessories or attachments might present a risk of injury. Only
use accessories or attachments for the stated purpose.
SERVICE
After every ten uses:
1. Apply a small amount of grease to the ACME
thread.
(Fig 19)
2. Lubricate the pins and bushings with light oil if
it is dif
fi
cult to open and close the tool.
(Fig 20)
3. Use a small amount of light lubricating oil in the
ball-nose spring plungers located on the slap-
on jaw post.
(Fig 21)
4. The bearing house is sealed and additional
lubrication is not necessary.
(Fig 22)
If you have questions, please feel free to
contact our customer service representa-
tives at 1-800-735-6845 or by email at
[email protected].
Fig 19
Fig 20
Fig 21
Fig 22
