5. Disengage
the
Safety Locking Bar
and place
the
Quick Release Pin
in the hole through the
Top Handle labeled UNLOCK.
(Fig 5)
6. Open the tool and place over the pipe until the
Tool Links
are tight against the pipe.
(Fig 6)
7. Engage
the
Safety Locking Bar
by moving the
Quick Release Pin
from the UNLOCK position to
the LOCK position.
(Fig 7)
Make sure the tool is perpendicular to the
pipe during squeeze-off.
8. Close the handles until the tool goes over center
into the self-locking position and the fl ow is con-
trolled.
(Fig 8)
Squeeze-off is complete when the handles
close against the stop and the notch in the
Safety Locking Bar
snaps over the pin.
TIMBERLINE TC2-SR
7
Fig 5
Fig 6
Fig 7
Fig 8
