Timberk THU UL 16M, Instruction Manual

Page: 15 / 20

IM2020
15
6. DELIVERY SET
1. Ultrasonic humidifier - 1 pc.
2. Instruction manual
– 1 pc.
3. Warranty card - 1 pc.
4. Packaging - 1 pc.
7. FILLING THE WATER TANK
1. Remove the top cover and pour the water into the water tank. Make sure of keeping direct water off plastic
tank.
2. Water level should not be higher than maximum lever marked onto plastic tank, otherwise it can lead to
damage of the appliance.
3. Close the top cover with the mist output nozzle on it.
4. Plug in the device.

Do not fill the tank with other liquids but filtered tap water. Different composition of liquids has harmful
effect on internal parts of the device and causes malfunctions.

Do not fill the unit or the water tank with such additives as essential oils, fragrances, cleaning agents,
chemical medical drugs, warm water (above 40°), etc. Otherwise, the water tank and internal parts of
the unit will be damaged and inoperable. Do not fill water directly into the internal parts of the unit or the
atomizer.

Water inside the unit may cause malfunctions of the unit.

Do not hit or throw the water tank. It may get damaged resulting in water leaks. Do not use the unit in
case if the water tank is heavily hit. Immediately contact the technical support service or the
maintenance and repair station.

Every day fill the tank with fresh filtered water and keep the unit clean.
8.
OPERATION OF THE DEVICE
THU UL 37 E (E1) operation
Switching on
Install the appliance vertically on a flat and dry surface, fill the tank with water then connect the device to the
power line. The device turns on by pressing the touch control button “POWER”. After pressing, steam will
come from the mist nozzle. At the very beginning of operation, the atomizing level may appear unstable,
which is caused by the temperature difference and water quality. It will take a short period time for this
process to stabilize.
ATTENTION!
If a large amount of condensate is generated on the upper part of the appliance when it is operating, then
you need to decrease the steam outlet intensity.
Adjusting steam outlet intensity
The steam output intensity can be adjusted by pressing the “MIST” touch control button. The device has the
following steam output intensity levels - 1/2/3. Comfortable conditions are reached at 40 to 60% relative air
humidity. You can yourself determine the comfortable humidity level or use a special device called a
hygrometer (not included in the set), measuring the relative humidity level.
Auto mode
In this mode, automatic intelligent humidity control is carried out. The device stops working when humidity
reaches 65%; resumes operation after humidity drops below 65%. Press the “MIST” button top activate this
function.