Timberk TGH 4200 SM1, Instruction Manual, Page: 12 / 20

IM2020
12
Danger of explosion, fire, carbon monoxide poisoning
3. APPOINTMENT OF THE DEVICE
The gas heater is designed to heat workplaces and areas in industrial premises and on open areas of
construction sites, warehouses, greenhouses, terraces, workshops, garages, etc., public premises with
temporary residence of people. This heater is convenient and easy to install, efficient and economical to use
due to minimal losses, increased heat transfer and the most comfortable distribution of heat flow. The gas
heater absolutely does not require any connection to the power supply. The possibility of local installation in
a place where heating is required ensures fuel economy. The thermal radiation of a gas heater, like sunlight,
is weakly absorbed by air and reaches heated surfaces almost without loss.
4. SPECIFICATIONS
Specifications of the device are shown in Table 1. Table 1
Parameter Units TGH 4200 M1
Gas type -
G30 (butane),
G31(propane) or
LPG (propane-
butane)
Gas category - I3B/P
Thermal output of gas burner kW 4.2
Thermal output of gas burner by
power modes
kW 1.5/2.9/4.2
Gas consumption g/h 110/210/305
Gas pressure
mbar
29-30
Heating area
m
2
20-80
Gas cylinder max capacity kg 5
Device dimensions mm 300*385*560
Net weight kg 7
5. DEVICE DESCRIPTION