Timberk TFH S10MMS, Instruction Manual

Page: 4 / 24

www.timberk.com • Electric fan heater
4
IMPORTANT!
The manufacturer reserves the right to change the set-list of the
device (including liquid and powder components) for different
supplies without prior notice. The changes either in no way influence
the basic technical parameters of the device or may improve them,
and also not violate the legislation or quality standards of the
countries of manufacture, transit and selling.
The changes in the set-list may result in changing of the weight
and dimensions of the device, but not more than by +\- 5-20%
(depending on the product category)
4. OPERATION CONDITIONS
5. APPEARANCE AND COMPONENTS
1. Do not install the unit on unstable or uneven surfaces.
2. To prevent an electric shock, do not connect and disconnect the power
cord plug out of an outlet by wet hands.
3. For normal operation of the unit the mains voltage must be sufficient in
strict compliance with technical parameters indicated on the unit.
4. The unit must be mounted vertically only.
5. Do not use the unit in a room with high dust content. Otherwise, high
1. Power on/off
2. Body
3. Air outlet
Fig. 1
NOTE:
TIMbERk MMA company disclaims any liability for
possible damage, directly or indirectly caused by
Timberk products to people, pets, property in case if
it occured as a result of failure to observe rules and
conditions of operation, unit’s instalation, deliberate or
careless actions of the consumerof third parties.
Technical parameters
Table 1
amount of dust in the unit may cause its failure and voiding of guarantee
maintenance.
NEVER USE THE UNIT IN A HORIZONTAL OR INCLINED POSITION.
Description
Models
TFH T05UFX TFH S10MMS
Power supply V/Hz 220-240~/50 220-240~/50
Rated power consumption W 500 1000
Rated current A 2.3 4.5
IP class - IPX0 IPX0
Electric protection class - Class II Class II
Noise level dB 45 35
Device dimensions mm 130X95X145 165x130x185
Net weight kg 0,5 0,7
1
2
3