www.timberk.com • electric convector heater
9
9. Air ionizing function
The convector is equipped with an air ionizer.
9.1. You can switch on and off the air ionizer by means of the ionizer button
« ».
9.2. Air ionizer indicator « » is illuminated when the air ionizer is switched
on.
9.3. The air ionizer is a completely independent device and can operate
even when the unit’s heating mode is off.
10. «RESTART» function
In case of a short-term power outage, the convector will be automatically
switched on and will operate with the last user settings (except for timer
settings) after power supply is restored.
11. Switch off the convector
To switch off the convector, press and hold button « » for 3 seconds.
NOTE:
A small static electric charge may be accumulated on
metal surfaces of a case in units, equipped with an
air ionizer.
If your electric main has no grounding circuit or it is
damaged. In this case there is a small possibility of
electric shock from static voltage.
IMPORTANT!
If the unit is operated without a grounding circuit or it
is damaged, it is not recommended to switch on and
operate the air ionizer.
8. AIR IONIZER OPERATION PRINCIPLE AND PURPOSE
Table 2
Rated indices
Concentration
n+ (ion/cm3)
Concentration
n- (ion/cm3)
Unipolarity
coefficient Y
Minimum
permissible
N+>=400
n->=400
0,4=<Y=<1,0
Maximum
permissible
n+<=50000
n-<=50000
The unit must be cleaned regularly to remove dust and dirt from external
surfaces, since it affects its operation efficiency and temperature
parameters of room heating. Prior to preventive operations, switch off the
unit and disconnect it from electric mains, let it cool down, then wipe its
surface by a soft and slightly damp duster. It is not recommended to use
detergents for washing, including materials with abrasive elements. Prevent
damaging the unit by sharp objects, since scratches on a painted surface
may cause rusting.
Rear surface of the convector must also be regularly cleaned from dust and
dirt. For this purpose it is necessary to dismount the unit from the bracket,
and after cleaning it is necessary to return it to the initial position.
Preventive cleaning should be performed regularly to maintain technical
condition of the convector and preserve its external appearance for a long time.
9. MAINTENANCE
capture these electrons, receiving a negative charge and become negative
air ions, thus, a high concentration of light negative air ions of oxygen is
generated in the air.
The Ionizer is designed for sanitation and prevention of different diseases; to
reduce fatigability, to improve ability to work and immunity; to clean air
from airborne pollutions, allergens and microorganisms; to neutralize harmful
impact of operating computers, TV sets, office equipment on man; to restore
biological activity of the air, coming to a room through air conditioners, filters,
air-ducts; to create a comfortable environment and good mood.
Besides, air ionizers are intended to clean the air from tobacco smoke, smells,
resins, dust, pollen, plant spores, animal hair, viruses and bacteria. Air ionizers
will help to preserve your health, prevent infectious diseases, allergies and
create a comfortable environment at home and/or in the office.
Applied air ionizer complies with the current SanPiN dated 2003. Values of
rated indices of air ion concentrations and the unipolarity coefficient are given
in Table 3 (as per SanPiN 2.2.4.1294-03):
For models TEC.PF3 LE... IN
Principle of operation of the ionizer is generally reduced to the fact that under
high voltage, applied to metal needles with diameter of the point equal to
5…10 m, there is electron flowing-off electric efflux. Molecules of air oxygen
Summary of Contents for TEC.PF3 LE 2000 IN
