www.timberk.com • electric convector heater
2
Dear customer!
Thank you for your good choice and purchase of Timberk
domestic electric convector. It will serve you for a long time.
Timberk domestic electric convector is designed to heat and
create a comfortable environment indoors during cold season.
The convector can be installed vertically only in a place, where
it is possible to connect to 220V~, 50 Hz single-phase power
supply wiring. This heating unit is easy-to-use and easy-to-
install, and it is efficient and features operating economy due
to minimum electric power losses, improved heat transfer and
maximum comfort heat flow distribution.
Please, read this operation manual carefully prior to use of the convector.
This operation manual contains important information regarding your
safety, as well as recommendations on the proper operation of the unit and
its maintenance.
Save this operation manual together with the guarantee card, cash register
receipt, if possible, cardboard box and packing material.
The purchased convector can slightly differ from the one, described in the
manual, but that doesn’t affect the methods of its use and operation.
A number of precautions is to be observed upon operation of the fan
heater. Improper operation as a result of ignoring precautions may harm
health of the user and other people, as well as damage their property.
1. Read all instructions prior to operation of the convector.
2. When the convector is operating it heats up to a very high temperature.
To prevent burns, do not touch hot surfaces of the unit by hands or other
parts of the body.
3. The unit must be placed away from flammable and easily deformable
objects.
4. Make sure that the unit’s case and the heating element cooled down
prior to the unit is dismantled and packed for long-term storage.
5. When the unit is not operated for a long time, store it factory-packaged
in a dry and cool place.
6. DO NOT COVER THE UNIT when it is operated. Do not dry clothes and
any other fabrics and materials on the unit. It may cause its overheating,
failure or inflict significant damage to you and/or your property.
7. The unit must always be kept watched after, especially with children
nearby. Carefully watch children not to touch the unit by hand.
8. Always disconnect the convector from the mains when it is not used.
9. The unit is equipped with a European-standard plug with a ground pin.
The plug must match the European-standard outlet and enter it without
any effort. If the plug doesn’t enter the outlet or enters it too tightly, turn the
plug vertically 180° and try again. If you still cannot plug it then you need to
call for an electrician to replace the electric outlet. Never use the unit if the
plug is not fully connected to the outlet.
10. Do not connect the unit to the mains if its surface is damp (wet).
11. Never use the unit in a situation when it may contact water.
IMPORTANT!
Important precautions and instructions, contained in
this manual, do not account for all possible modes and
situations to be encountered. It is vital to understand
that common sense, caution and thoroughness are the
factors that are impossible to be built-in in any product.
These factors must be taken into consideration by man
who is interested in the proper operation of the unit.
The manufacturer does not bear any responsibility in
case when the unit or its parts are damaged during
transportation, as a result of improper installation,
voltage fluctuations, as well as if some part of the unit
was altered or modified.
IMPORTANT!
The manufacturer considers this type of failure a non-
guaranteed event.
1. IMPORTANT INFORMATION
2. PRECAUTIONS
Summary of Contents for TEC.PF3 LE 2000 IN
