Timberk T-HU6-A19E-W, Instruction Manual

Page: 19 / 32

IM2022
19

Touch the “MIST OUTPUT” button to adjust the mist output, meanwhile “AUTO” symbol will
disappear. = level 1, = level 2, = level 3.

Long touch “MIST OUTPUT” button
to entre NIGHT MODE. Display will become dim and show
NIGHT MODE symbol , indicator light will be off. 10 seconds later, whole display will be off except
NIGHT MODE symbol . There is no operative sound and waterless warning sound under this
mode. Long touch the button again to exit NIGHT MODE.

Touch the “HUMIDITY” button
to set your expected humidity from 30%RH to 75%RH, display will
show symbol . Touch once, it will increase by 5%RH.

The LED display will flash the expected humidity three times and then turn back to show the current
humidity. The humidifier enters into the constant humidity function, the expected humidity is set.

Under constant humidity function, humidifier will adjust mist output level automatically.

When the expected humidity is 1%RH ~ 10%RH higher than current humidity, humidifier works in level
1.

When the expected humidity is 10%RH ~ 15%RH higher than current humidity, humidifier works in level
2.

When the expected humidity is 15%RH higher than current humidity, humidifier works in mist output
level 3.

When the expected humidity is less than the current humidity, the devise will be in sleeping state.
(Timer function is still working under this state.)

When the expected humidity is higher than the current humidity, the humidify function will work again.

Touch the button till the LED display shows “Co”, or long touch the button, it means to cancel the
humidity setting and back to AUTO MODE.

Touch the “TIMER” button
to set your desired working time from 01-12 hours. Touch till display
shows “Co” or long touch the button
, it means to cancel the timer setting.

First touch the “UV” button to start “HEATING” function, display will show HEATING symbol
as well. Second touch the button
to start “UV” function, display will show UV symbol
. Third
touch to cancel “HEATING” function. Forth touch to cancel “UV” function.

First touch the “INDICATOR LIGHT” button
, indicator light will be green. Second touch light will
be blue. Third touch light will be warm yellow. Forth touch light will be 7-color changing. Long touch the
button to turn on/off the light.

Auto Shut-Off: Once the water in the basin is too little to keep the humidifier working, the humidifier will
automatically stop working and have 3 beep sounds (No sound under NIGHT MODE). Display will only