Timberk T-AC07-S27-X, Instruction Manual

Page: 8 / 56

IM2019
8
Requirements for Installation position:

Avoid places of inflammable or explosive gas leakage or where there are strongly
aggressive gases.

Avoid places subject to strong artificial electric/magnetic fields.

Avoid places subject to noise and resonance.

Avoid severe natural conditions (e.g. heavy lampblack, strong sandy wind, direct sunshine
or high temperature heat sources).

Avoid places within the reach of children.

Select where it is easy to perform service and repair and where the ventilation good.

The outdoor unit shall not be installed in any way that could occupy an aisle, stairway, exit,
fire escape, catwalk or any other public area.

The outdoor unit shall be installed as far as possible from the doors and windows of the
neighbors as well as the green plants.
Requirements of the mounting structure:

The mounting rack must meet the relevant national or industrial standards in terms of
strength with welding and connection areas rustproofed.

The mounting rack and its load carry surface shall be able to withstand 4 times or above
the weight of the unit.

The mounting rack of the outdoor unit shall be fastened with expansion bolt.

Ensure the secure installation regardless of what type of wall on which it is installed, to
prevent potential dropping that could hurt people.
Electrical Safety Requirements:

Be sure to use the rated voltage and air conditioners dedicated circuit for the power supply,
and the power cable diameter must meet the national requirements.

If the rated current of the device is greater than or equal to 16A, it is necessary to use a
connection to the mains with the organization of an individual line and install an ELCB. For
the connecting line, a cable with a cross section of 1.5-2 mm
2
and circuit breakers are
used.

The minimum clearance between the air conditioner and the combustibles is 1.5 m.

The interconnection cord enables connect the indoor and outdoor units. You must first
choose the right cable size before preparing it for connection.

Cable Types:
Indoor Power Cable (if applicable): H05VV-F;
Interconnection cord: H07RN-F or H05RN-F;