Timberk SWH
RE3
100
V, Instruction Manual

Page: 3 / 28

3
6. Never use the water heater if it is broken.
7. Do not remove the water heater cover when it is in operation.
8. Immediately unplug the water heater from electrical main if strange
sounds, odor or smoke are coming from it.
9. Always unplug the water heater from electrical main during a
thunderstorm.
10. Prior to cleaning and maintenance of the water heater unplug it from
electrical main. Cleaning and maintenance must be performed in
compliance with instructions of this operation manual.
11. Do not use hazardous chemical substances to clean the water heater
and prevent their contact with the appliance.
12. To prevent electrical shock the damaged power cord must be replaced
only in manufacturer's authorized service centers by qualified specialists.
13. To prevent electrical shock do not place the power cord nearby heating
devices and flammables or combustibles.
14. Since temperature of water in the water heater can reach 75°C, when it
is in operation you should not place your body parts under hot water at the
first run.
To prevent burns you should adjust the temperature of the
discharging water.
15. Do not use the water heater for purposes not specified by this
operation manual.
16. Do not use the water heater in an explosive or corrosive environment.
Do not store gas and other volatile flammable liquids next to the appliance
it is very dangerous!
17. It is forbidden to make alterations in the design of the water heater or
modify it.
18.
Any service operations must be performed by a specialized
organisation and qualified specialists. Improper installation may cause
voiding of guarantee maintenance.
19. The water heater is not intended for use by children and persons with
reduced physical, sensory or mental capabilities, or a lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by an individual responsible for their
safety. Children should be supervised to ensure that they do not play with
the appliance.
3 . PERFORMANCE PARAMETERS
1. Completely automatic control: automatic water heating, continuous
automatic water temperature control.
2.
DROP Defense leakage protection and protection against surplus
pressure within a tank (pressure safety valve).
HOT Defense two-stage overheating protection (thermostat and
temperature limiter).
ALL PROTECTION SYSTEMS ARE RELIABLE AND SAFE.
3. Steel internal tank with a special titanium fine glass enamel coating,
applied by the modern electrostatic dry enameling method, is resistant
to corrosion and scale. Also enamel has an increased adhesive
capability and high ductility (hardened at 850°C), which allows it to
expand and contract at temperature drops in the same ratio as the
internal tank walls not generating microcracks, where corrosion may
emerge.
4. Pipes of heating elements are designed taking into account high heat
load: safe and reliable, with an increased service life.
5. The water heater is equipped with an anode bar to protect the
internal tank from corrosion and decrease scale generation on the
heating element.
6.Internal thickened urethane foam insulation allows to efficiently
preserve temperature of the heated water and minimize heat losses,
reducing power consumption of the water heater.
7. The water heater has simple structure and is convenient in service.
ENGLISH
www.timberk.com e lectric storage water heater