Timberk Natt T-AC07-S29-X, Instruction Manual

Page: 17 / 52

IM2020
17
1. POWER - Turns the air conditioning on / off.
2. MODE - Selecting the operating mode: AUTO
– COOL - DRY - HEAT - FAN.
3. SPEED - Selection of the ventilation speed according to the scheme: LOW - MID - HIGH -
AUTO.
Note: AUTO air speed is not available in ventilation mode.
4,5.
Buttons «Up», «Down» . The «Up» button (4) - the temperature will rise by 1 °C. The
«Down» button (5) - the temperature will drop by 1 °C. The temperature setting range is from
16°C (60°F) to 32°C (90°F).
6. SWING - Horizontal rotation mode. Controlling the direction of the airflow horizontally. Press
this button to turn the louver left/right (in this model the function is not provided).
7. SWING - Vertical rotation mode . Controlling the direction of the airflow vertically. Press this
button to turn the louver up/down.
8. TURBO - Automatic operation of maximum cooling (in cooling mode) or maximum heating (in
heating mode).
9. TIMER - Setting the on/off time of the air conditioner by timer
10. iFAVOR -
Return the device to the user’s previous personal settings (option is not supplied
in this model).
11. iFeel - Click this button to display temperature settings in the control panel for a comfortable
temperature. The remote-control sensor measures temperature of the room and sends data to
the indoor-unit. So set temperature is established near the remote-control, not near the indoor
unit. The second press adjusts the pre-set temperature.
12. HEALTH - Activating the ionization function (option is not supplied in this model).
13. SLEEP - Click it and temperature will decrease on 2 degrees during 10 hours. After this time
expires, the device will return to automatic mode. The speed of fan also gets lower, so the noise
level decreases too.
14. iCLEAN - Pr
ess "iCLEAN" when the device is OFF, the remote control will display “CL” and
the air conditioner will start the cleaning function. This function gives opportunity to prevent
fungus appearance and bad smell by drying moisture from evaporator (using drying, purging and
heating the module), which increases the efficiency of cooling and heating. iCLEAN mode works
for about 30 minutes.