Timberk Lotta FS1D V Series, Instruction Manual

Page: 28 / 64

IM2021
28
8. WATER HEATER CONTROL
Control panel
*The illustration is provided for reference only and may differ from the actual control
panel.
1. ON/OFF button: for turning the product on and off
2. Temperature display
3. Temperature selection button
Water heater operation
1. Open one of the hot water outlet taps, then open the cold water inlet tap. The
electric water heater will start to fill with water. When water starts flowing freely from
the hot water tap, this means that the water heater is completely filled with water and
the hot water outlet tap can be closed.
NOTE!
During normal operation, the cold water inlet tap must be in the “open” position.
2.Put the electric plug into the socket.
3. Press the
«ON/OFF» button to turn the water heater on. When turned on, the
current water temperature and heating mode will appear on the display.
4. Press the
«SET» buttons to select the desired temperature. Pressing the «SET»
button once changes the temperature in 5
°C increments. The temperature setting
range is 30-
75°C. Current water temperature in the water heater is displayed on the
front panel during operation.
5. To turn off the water heater, press the
«ON/OFF» button and unplug the product
from the socket.