Timberk AC TIM 48LC CF6, Instruction Manual, Page: 7 / 32

www.timberk.com • Electric air conditioner
7
1. Auto mode. The operation indicator lights up and the air conditioner
works in the forced automatic mode. The remote controller can be used.
2. Forced cooling. The operation indicator blinks and the air conditioner
works in the forced cooling mode. The fan speed is high for 30 min. The
remote controller cannot be used.
3. Off mode. The indicator is extinguished and the air conditioner does not
work. The remote controller can be used.
1. Button «TEMP UP». Increase the
temperature or time by 1 unit.
2. Button «TEMP DN». Decrease the
temperature or time by 1 unit.
3. Button «ON/OFF». To switch the
conditioner on and off.
4. Button «ECO». In cooling mode,
press this button, the tempera-
ture will increase 2 °С on the
base of setting temperature. In
heating mode, press this button,
the temperature will decrease 2
°С on the base of setting tem-
perature.
5. Button «MODE». To select the
mode of operation.
6. Button «SLEEP». To activate the
function «SLEEP».
7. Button «FAN». To select the fan
speed of auto/low/mid/high.
8. Button «SWING». To activate or
deactivate of the movement of
the deflectors.
9. Button «HEALTH». To switch – on
/off HEALTH funtion. It is a but-
ton which controls the ionizer or
plasma generator only for inverter
type.
Fig. 3
Remote control
10. Button «TURBO». In cooling mode, press this button, the unit will give the
maximum cooling temperature. In heating mode, press this button, the unit
will give the maximum heating temperature.
11. Button «DISPLAY». To switch on/off the LED display (if present).
12. Button «TIMER». To set automatic switching on/off.
1
3
6
9
4
8
5
7
2
SWING SWING
SLEEP
FAN
TURBO
TIMER ECO MODE
DISPLAY
HEALTH
12
10
8
11
Fig. 4
The outlooking and some function of remote control may vary according to the
model.
The shape and position of buttons and indicators may vary according to the
model, but their function is the same.
The unit confirms the correct reception of each press button with a sound signal.
In order to avoid malfunction of the remote control board do not insert used
batteries or batteries of various types.
If the conditioner is not used for a long time, remove batteries from the board or
else electrolyte may leak and damage the board.
In normal operation of the conditioner average service life of batteries will be
about a half-year.
Replace batteries, if command receiving is not confirmed with an audio signal,
or if the display does not show a sign of command transfer. When generating
commands from the remote control board, point an IR-radiator at a remote-con-
trol signal receiver situated on the indoor unit. Hold the remote control board at
the distance of no more than 8 m from the indoor unit. The remote control board
will not work, if there are any curtains, doors or other things between it and the
indoor unit. Protect the board from water and exposure to direct sunlight and
heat sources.
Remote control display
а) FEEL mode indicator
b) COOLING indicator
c) DEHUMIDIFYING indicator
d) FAN ONLY OPERATION indicator
e) HEATING indicator
f) ECO indicator
g) CLOCK indicator
h) TIMER OFF indicator
i) TIMER ON indicator j) FAN indicator:
AUTO;
LOW/ MIDDLE/ HIGH FAN SPEED
k) SLEEP indicator
l) HEALTH indicator
m) FLAP SWING indicator
n) FLAP SWING indicator
o) TURBO indicator
1
3
6
9
4
8
5
7
2
SWING SWING
SLEEP FAN
TURBO
TIMER ECO MODE
DISPLAY
HEALTH
12
10
8
11
a b c d e f
i
j
g
h
k l m n o