Timberk AC TIM 48LC CF6, Instruction Manual

Page: 6 / 32

www.timberk.com • Electric air conditioner
6
4. APPLIANCE DESCRIPTION
5. DELIVERY SET
6. APPLIANCE CONTROL
The conditioner consists of indoor and outdoor units connected by
pipelines. The conditioner is controlled from a remote control board or from
a control panel of the indoor unit.
1. Conditioner unit for indoor installation
2. Control and indication panel
3. Blinds (deflectors) for distribution of treated air
4. Air inlet of indoor unit
5. Tube for condensate removal
6. Copper tube for gas (freon).
7. Conditioner unit for outdoor installation
8. Air inlets of outdoor unit
9. Return air grillages of outdoor unit
Complete set of air conditioner (split system) includes:
1. Conditioner unit for indoor installation - 1 piece
2. Conditioner unit for outdoor installation - 1 piece
3. Remote control - 1 piece
4. Batteries for remote control board - 2 pcs.
5. Operator’s manual -1 piece
6. Warranty card- 1 piece
7. Packing of indoor-installation unit - 1 piece
8. Mounting brackets of the indoor unit - 1 piece
Fig. 1
8 7
3
2
1
4
6
5
9
City-Hall
SERIES
The conditioner is controlled from a remote control board or from a control
panel of the indoor unit. Control and indication board of your conditioner
may visually differ from a layout view shown below. Its functions will remain
the same.
Emergency control shall be used if the remote control board is lost or
broken, or batteries are low. Using an emergency control button situated
on the indoor unit control panel you may select COOL or AUTO mode of
the conditioner work. Pressing this button, select a mode of the conditioner
work: AUTO, COOL, the conditioner is OFF, AUTO again, etc.
Fig. 2
RUN
DEFROST
TIMER
FAULT
Operation indicator
Temperature Indicator
defrosting/preheat light
Warning light
Timing light On/Off
Infrared
signal
receiver
Description of indoor unit control board