Timberk AC TIM 07H S20, Instruction Manua

Page: 14 / 44

www.timberk.com • Electric air conditioner
14
NOTE:
1.In the low temperature heating mode, the fan speed
was default to Auto and nonajusatable.
2.In the low temperature heating mode, «TURBO» and
«QUIET» can’t be set. If enter the low temperature
heating mode,the turbo and quiet function that started
before will be canceled. As well as when exit the low
temperature heating mode, it will not resume.
3.When exit from the low temperature heating mode,
the speed and temperature will turn into the original
condition before it started.
4.You can set up other function.
8. MAINTENANCE
• Before cleaning unplug the conditioner.
• Cleaning of the indoor unit and remote control board:
• Indoor unit and remote control board should be cleaned with a dry soft cloth.
• If the indoor unit is too unclean, moisten the cloth with cold water.
• It is prohibited to clean the remote control board with moist cloth.
• In order to avoid the damage of paint or details of the conditioner, do not
clean it with brushes and do not leave them on the surface of indoor unit.
• In order to avoid the damage of surface or deformation of the conditioner
details, do not clean it with petrol, solvents, cleaning powders or other
chemically active substances.
• Before a sustained interruption in the conditioner work:
• Turn the conditioner on for several hours in the FAN mode. It will allow you to
dry its inner cavities
• Unplug the conditioner. Remove the batteries from the remote control board.
• Checks before starting:
• Make sure that an air filter is installed.
• Make sure that air inlet and outlet grilles of the outdoor unit are not blocked
by foreign objects.
• Cleaning of air filter
• Air filter cleans the air entering the conditioner from dust and foreign
particles. If the filter is contaminated, the conditioner capacity decreases
sharply.
• If the conditioner is operated permanently, the filter should be cleaned once
per two weeks.
• If the conditioner is installed in a room with dusty atmosphere, then the air
filter should be cleaned more often.
• To remove the filter, open the indoor unit panel.
• Remove air filters. Clean the filter with a vacuum cleaner or rinse it in clean
water. If the filter is contaminated heavily, clean it with a soft brush and wash in
diluted washing solution, then dry it in a cool place.
• While cleaning the filter with the vacuum cleaner, hold it with contaminated
surface up. While washing the filter in water, hold it with contaminated surface
down.
• Do not dry the filter in the sun or near a fire.
• Set the air filter to initial position and close the panel.