Timberk AC TIM 07H S20, Instruction Manua

Page: 12 / 44

www.timberk.com • Electric air conditioner
12
When selecting «no display» on the remote controller, the temperature
indicator which on the indoor units will display the set temperature.
When selecting « » with remote controller, temperature indicator on indoor
unit displays indoor ambient temperature.
When selecting « » with remote controller, temperature indicator on indoor
unit displays outdoor ambient temperature.
CLEAN button
The Clean mode can not be set in the state of power-on; if the air
conditioner ran Cooling and Dry mode before turning off. Press «CLEAN»
button and show « » then the Clean mode is turned on; Press «CLEAN»
button again, « » disappeared, then the Clean mode is turned off, or
running 10 mins in Clean mode then turn off automatically.
In hte first power on, the Clean mode is turned off acquiescent.
The Clean mode can not be set and displayed when the air conditioner was
in auto, Fan and Heat mode before turned off.
CLOCK button
Press this button to set clock time. « » and « » icon on remote
controller will blink. Press « » or « » button within 5s to set clock time.
Each pressing of « » or « » button, clock time will increase or decrease 1
hour. Press this button again, « » and « » icon on remote controller
will blink. Press « » or « » button within 5s to set clock time. Press this
button another time, « » and « » icon on remote controller will blink.
Press « » or « » button within 5s to set clock time. If hold « » or « »
button, clock time will change quickly.
Release when reaching your required time. Press «CLOCK» button to
confirm the time, « » icon stops blinking.
TIMER ON button
This button can set the time for timer on. After pressing this button, « »
icon disappears, «ON» and « » icon on remote controller blinks. Press
« » or « » button within 5s to set «TIMER ON» time. Each pressing of
«» or « » button, the time will increase or decrease 1 hour. Press this
button again, «ON» and « » icon on remote controller will blink. Press
« » or « » button within 5s to set the time. Press this button another
time, «ON» and « » icon on remote controller will blink. Press « »
or « » button within 5s to set the time. Hold « » or « » button, the time
will change quickly until reaching your required time. Press «Timer ON» to
confirm it. The word «ON» will stop blinking. « » icon resumes displaying.
Cancel TIMER ON
Under the condition that TIMER ON is started up, press «TIMER ON»
button to cancel it.
TIMER OFF button
This button can set the time for timer on. After pressing this button, « »
icon disappears, «ON» and « » icon on remote controller blinks. Press
«» or «» button within 5s to set «TIMER ON» time. Each pressing of
«» or «» button, the time will increase or decrease 1 hour. Press this
button again, «ON» and « » icon on remote controller will blink. Press
«» or «» button within 5s to set the time. Press this button another
time, «ON» and «  » icon on remote controller will blink. Press «» or
«» button within 5s to set the time. Hold «» or «» button, the time
will change quickly until reaching your required time. Press «Timer ON» to
confirm it. The word «ON» will stop blinking. « » icon resumes displaying.
Cancel TIMER OFF
Under the condition that TIMER OFF is started up, press “TIMER OFF”
button to cancel it.
NOTE:
Outdoor temperature display is not available for some
models. At that time, indoor unit receives « « signal, it
displays indoor set temperature.
NOTE:
Clock time adopts 24-hour mode.
The interval between two operation can’t exceeds 5s.
Otherwise, remote controller will quit setting status.
Operation for TIMER ON/TIMER OFF is the same.