3
Step 2. Assembly of footrests
Assemble the right and the left footrest in the front part of the frame
by placing them on two pins and turn them inwards until they are
locked.
Step 3. Adjustment of footplates
Adjust the right and the left footplate by tightening the screw placed at
the bottom of footrests with included key. Then, adjust the inclination
angle of the footplate to the ground using the lever. Proper space
should be left between the footplates and the ground as footplates set
too low may cause difficulties in overcoming such obstructions as curb.
Adjust the footplates so that the angle between trunk and thighs is 90
o
(as a result the user does not need to contract legs).
Step 4. Adjustment of anti-tipping wheels
In order to adjust anti-tipping wheels, which are located at the back of
the wheelchair, pull the lock, move the wheels upwards or downwards,
and select appropriate height.
Step 5. Checking the assembly of wheels
Lift the wheelchair slightly and spin the right wheel and then the left
one by pulling the hand rims and check if the wheels spin properly.
Step 6. Assembly of headrest
Fix the headrest to the backrest by tightening the locking knobs, and
then using Velcro, fix the pillow stabilizing head to the headrest.
Step 7. Assembly of upholstery
Place the upholstery on the seat with Velcro directed downwards.
Step 8. Assembly of transverse stabilization
Assemble the transverse stabilization, which is located at the back of
the backrest, by tightening the fixing screw to the right hand grip.
