Tilswall FY8233X, User Manual

Page: 7 / 19

Maintenance
• Before opening the back cover, the test leads should be
disconnected with the measuring circuit.
• In order to protect the internal circuit of the instrument, do not use
the meter until the resettable fuse is installed in this series of
instruments, the back cover is properly closed and the screws are
tightened.
• Use only a damp cloth and a small amount of detergent to clean
the meter, do not wipe the case with chemical solvents.
• If any abnormality is observed, immediately stop using the meter
and send it for repair.
Technical Specifications
Accuracy: ± (% of reading ± counts); Warranty period: 1 year
Environment temperature: 18°C to 28°C; Temperature humidity:
80%
General specifications:
Maximum voltage between any terminal and earth ground: CAT III
600V
Power: AAA batteries 1.5V x 2
Maximum display: 5999
Overrange indication: “OL”
Polarity display: negative polarity display “-”
Operating temperature: 0°C to 40°C
Storage temperature: -10°C to 50°C
Low voltage indication: display “ ”
Dimensions: 138x68x30 mm
Weight: about 170g (without batteries)
-05-