Operation - 17
GENERAL OPERATION
Receiver Hitch Use
The Power Ox 240B has an adjustable receiver
hitch to easily connect and disconnect tools. The
following steps describe how the receiver hitch can
be installed.
1.
WARNING
Always shut off the engine and ensure all moving
parts have come to a complete stop before
adjusting the hitch, installing, or removing an
implement.
Install the hitch in the standard elevated position
(A) for increased ground clearance.
2. The hitch can be installed in the lower position
(B) if needed by simply flipping the receiver over.
A
A
B
B
3.
In both configurations the hitch receiver is
secured in position using a 5/8” hitch pin (C)
placed through the top of the frame secured in
place with a hair pin placed through the bottom
of the hitch pin.
4.
C
C
Tighten the 1/2” bolt (D) located on the bottom of
the frame to hold the hitch receiver steady.
5.
D
D
The connected tool is held in place using a 3/4”
hitch pin secured in place with a hair pin placed
through the bottom of the hitch pin.
