9
4
Outputs
4.1
Analog output
The analog outputs can be assigned any measured quantity, see table
Measured quantities”
.
The output is available with three different ranges, ±20 mA, ±5 mA or ±10V. The resolution of the
output is 16 bits. 2 to 5 characteristic point can be programmed for each channel. It is possible to
set a fixed value for the output. Fixed output is useful when testing an installation. Off position is
the same as 0 mA or V.
4.2
Digital outputs
Digital output is used to pulse energy, P (active power) or Q (reactive power) as export or import.
4.3
Modbus RS485
4.3.1
Interface Modbus RTU
Protocol:
Modbus RTU
Physics:
RS-485, max 1200 m (4000 ft)
Baud rate:
2400, 4800, 9600, 19200, 38400 Baud
Number of participants:
max 32
