19
!
You can start then engine using any of the following methods.
o
Remote start.
Push and hold the ON button on the remote control. The remote indicator
light should flash. If the light does not flash, the unit may require new batteries.
o
Ignition key
. Turn the ignition switch to the ON position and hold for a few seconds. DO
NOT HOLD FOR MORE THAN 5 SECONDS. If the engine fails to start, release the
switch and wait 10 seconds before operating the starter again.
NOTE:
If the speed of the starter motor drops after a period of time, it is an
indication that the battery should be recharged. When the engine starts,
release the key to allow the engine switch to return to the ON position.
Operating the starter motor for more than 5 seconds can damage the motor.
!
o
Recoil start
. Pull the starter grip lightly until resistance is felt, then pull briskly. Do not
let the handle snap back. Rather, guide the handle gently back to the engine.
!
Once the engine starts and has warmed up, by pushing the choke lever to the OPEN position.
!
The choke should automatically return to open if you are using the remote control.
STOPPING THE GENERATOR
Stopping the Engine
In an emergency:
!
To stop the engine in an emergency, move the engine switch to the OFF position.
In normal use:
!
Turn the AC circuit breaker to the OFF position. Disconnect DC battery charging cables.
!
Press the Off button on the remote control for few seconds or turn the engine switch to the
OFF position.
!
Turn the fuel valve lever to the OFF position.
Summary of Contents for TPP-4500G-A
Page 13: ...13 GENERATOR COMPONENTS See next page for further explanations...
Page 29: ...29...
