48-volt model
Smart charger for Lithium-ion battery
Voltage AC 100 -240 V
Frequency 47-63 Hz
Charging voltage (charge) 48 V+/- 5 V
LED power indication: red on charge
LED charge indication: green charged or disconnected from the battery
Operating temperature range Between 10° C and 35° C
Safety standard EN60335 –1- A2 –2006
THE CHARGER
The charger that comes with your TilChap complies with CE manufacturing standards, and with IEC/EN 60335-1 environmental protection standards and has been specially designed to
recharge its battery. It will fully recharge the battery in 4 to 6 hours depending on ambient temperature and battery wear.
On the top of the charger, the "charge" diode indicates the battery
charge level. It is red when the battery is charging and turns green when
the battery is recharged.
Page 52
Charger protection
•
Do not expose it to rain
•
Do not leave the charger disconnected from the power supply (220 volts) and connected to
the battery
•
Do not submerge it
•
Do not place any object on the charger or cover it
•
Take care of the charger's electrical wires
•
To protect the charger after a long charge (more than 24 hours) unplug the electrical
connection and leave the device in a dry and ventilated place
•
Avoid leaving the charger connected to the mains for more than 24 hours.
NB! FOR YOUR SAFETY, IT IS FORBIDDEN TO OPEN THE CHARGER (RISK OF ELECTRIC SHOCK -
HIGH VOLTAGE). CONTACT YOUR DEALER FOR ANY PROBLEMS WITH THE CHARGER.
WARNING
VENTILATION OF THE EXTERNAL CHARGER
External chargers contain a cooling fan that is in operation while the
batteries are being charged.
•
Install your charger outside of the TilChap in a dry place, sheltered from
water and sun, ventilated, unconfined, clean and dust-free
•
Make sure that the fan is running during charging
Failure to follow these instructions may result in serious personal injury
and/or property damage
English
