TIL TDFM-9300 Installation Instructions Manual Download Page 3

Page: 3 / 46

TECHNISONIC INDUSTRIES LIMITED

TDFM-9300 Installation Instructions

TiL 13RE471 Rev. D Issue 5

REVISION HISTORY

[ 13RE471 ]

For the most current revision of this document, please check the Technisonic website: www.til.ca

REV

PAGE

DESCRIPTION

DATE

EDITED

Corrected DO-160 Information.

Jul. 2013

Front Page

Front Panel Image changed.

Oct. 2013

A – 1

1 to 5

Fixed Radio P/N Nomenclature.

Nov. 07, 2013

A – 2

P/N in Section 2.4 Corrected.

Jan. 27, 2014

All

Corrected Spelling & Grammar throughout
document.

Changed Installation Approval Note.

May 15, 2014

Added Special Order Band Codes.

2 and 14

Specified “Section 2.17 Configuration Menu”
Refers to TDFM-9300 Operating Instructions.

Added Antenna & Connector Locations as well as
Band Display Orientation.

15 to 19

Updated Figures 4 – 8.

All

Changed Format for Section Headers.

Changes made to DO-160G:

- Operational Shock and Crash Safety changed

to Category B.

- Flammability Condition added.

Sep. 10, 2015

Corrected Installation Approval Note.

All

Page Numbers are now sequential.

Flammability Category C refers to Mod 6 only.

Nov. 09, 2015

33 to 35

Added Environmental Qualification Form.

D – 1

15 to 19

Updated Figures 4 – 8.

Feb. 16, 2016

D – 2

All

Added band info on new Tri Band RF module.

Apr. 29, 2016

D – 3

Added Website Information to Revision Page.

Oct. 05, 2016

15 to 19

Updated Figures 4 – 8.

Minor text fixes.

Added Section 2.23: Post Installation Adjustment.

D – 4

Updated Test Frequencies.

Feb. 13, 2018

D – 5

All

Updated to MCP (MOD14).

Oct. 10, 2019

Summary of Contents for TDFM-9300















































Search results

Summary of Contents for TDFM-9300

Reviews:

Related manuals for TDFM-9300

Brands by name

Popular brands

TIL TDFM-9300, Installation Instructions Manual

Search results

Summary of Contents for TDFM-9300

Reviews:

Related manuals for TDFM-9300

Brands by name

Popular brands