TECHNISONIC INDUSTRIES LIMITED
TDFM-9000 Installation Instructions
TiL 11RE442 Rev. D Issue 1
2
Tray Breakdown: (TBB):
T= Module type: A= T30xx RF modules (Single or Dual)
B is Band code for each module in the tray.
Band Codes
Band numbers indicate single band modules and letters indicate dual band modules.
* Band codes are special order and are not standard configuration.
Project Number: P9XXXX represents a 5-digit project number that identifies specific options that
are contained in each module and describes the full TDFM-9000 configuration.
All model variations are capable of supporting both 28 Volt and 5 Volt AC or DC back lighting.
The units are shipped set to operate on 28 Volt back lighting. Equipment can be set to operate on
5V back lighting by using the software based configuration menu. See Section 2.17 Configuration
Menu in the TDFM-9000 Operating Instructions available at www.til.ca. Damage will not occur if
the incorrect voltage is applied.
1
VHF (136-174)
2
UHF LO (380-470)
3
UHF HI (450-520)
4
700/800 (764-870)
A
V/700/800
B
V/UHF LO
C
V/UHF HI
D
UL/UH
E
UL/700/800
F
UH/700/800
* G
700/800/V
* H
700/800/UL
* I
700/800/UH
* J
UHF LO/V
* K
UHF HI/V
* L
UH/UL