TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-7300-2 Installation & Operating Instructions
TiL 10RE430A
1-5
Type II Modules
Specification
Characteristic
RF Output Power:
1 or 6 Watts (VHF)
1 or 5 Watts (UHF)
1 or 3 Watts (800)
Frequency Range
VHF Module:
UHF LO Module:
UHF HI Module:
700 / 800 Module:
136 to 174 MHz
380 to 470 MHz
450 to 520 MHz
764 to 870 MHz
No. of channels per band:
1000 pre-programmable channels
240 channels (15 zones of 16 channels) for
modules with Front Panel Programming.
Transmitter section
VHF
UHF
800
FM Hum and noise in dB (wideband):
Frequency Stability in ppm:
Audio Distortion:
Modulation Limiting:
-48 -45 -45
±2.0 ±2.0 ±1.5
1% 1.5%
1.5%
Wide band
±5kHz
Narrow band ±2.5kHz
Receiver section
VHF
UHF
800
Sensitivity
in uV:
*Digital 1% BER (12.5kHz)
*Digital 5% BER (12.5kHz)
**Analog with 12dB SINAD
0.25 0.25 0.40
0.25 0.25 0.25
0.25 0.25 0.25
Selectivity
in dB:
25 kHz Channel
12.5 kHz Channel
Intermodulation * **
-80 -78 -72
-63 -63 -63
-78 -77 -75
*Measured in digital mode per TIA / EIA IS 102.CAAA under nominal conditions.
** Measured in analog mode per TIA / EIA 603 under nominal conditions.
