background image

99RE255

TDFM-136 Installation & Operating Instructions

2-10

Technisonic Industries Ltd.

Once the user is finished and selects ‘ENTER’ then the newly edited channel parameters
are selected and displayed for the appropriate channel.

    L2 - Copy Guard to Main

Copy the currently displayed Guard information UP to the Main channel. This information is used
until the Main Channel is changed (via direct entry or scroll) or until the unit is turned off. The user
may save the new data by pressing ‘ENTER’ or return to the previous data by pressing ‘ESC’.

   L2  Lock Keypad

This command locks the keypad to prevent accidental change to parameters of the radio
unbeknownst to the operator. This will disable all keyboard functions (except keyboard unlock and
display luminance). To unlock the keyboard, press and hold the 

>

ESC

====

 key for two seconds.

jéÇä>ìáÑ>äÑòèÄÉJ>ÉàíèãÄòí>ºjéÇäÑÉE>îçìàã>äÑò>ëÑãÑÄíÑÉL

sçãéÇä>ìáÑ>äÑòèÄÉ>FÄÖìÑë>P>íÑÇéçÉíGJ>ÉàíèãÄòí>ºsçjéÇäÑÉE>îçìàã>äÑò>ëÑãÑÄíÑÉL

            L2 Edit Network Access Code (NAC)

This command allows the user to edit the Network Access Code (NAC) used in Project 25
operation. The NAC is a three (3) digit hexadecimal code (digits 0 – 9 plus A, B, C, D, E, F). The
editor operates as follows:

íÇëéãã>

îè

îè

îè

îè

>ìáëéîÜá>áÑó>ÉàÜàìí>FNKWJ>_KdGL

>>>>>>åéïÑ>Çîëíéë>ÖéëñÄëÉ>M>ÅÄÇäñÄëÉL

ÄÇÇÑèì>ìáÑ>Ñçìëò>ÄçÉ>ëÑìîëçL

ÄÅÄçÉéç>ìáÑ>ÇéååÄçÉ>ÄçÉ>ëÑìîëçL

            L2 Edit Scan Lists

This command is available only when the unit is in ‘Main’ mode (

MN/GD = MN

).

This command allows the user to select which of the 

SCAN LISTs

 - if any - that the selected

channel is included in. The channel may be a member of any, or all, of the five (5) scan lists that are
supported.

Summary of Contents for TDFM-136














































Reviews: