99RE255
TDFM-136 Installation & Operating Instructions
2-2
Technisonic Industries Ltd.
2.2 Command Types
There are two basic command types: Inherent and Edit. An
Inherent
command is one that
requires no additional input from the user, such as the ‘memory brightness’ or ‘scroll
memory’ commands.
An
Edit
command requires further input from the user. Most, but not all, edit commands can
affect either the Main or the Guard Channel. The channel is to be edited depends on the
position of the
MN/GD
and the
G1/G2
front panel switches. After selecting the command,
the system expects further input from the user. All edit commands may be terminated in the
same way:
ÄÇÇÑèì>ìáÑ>Ñçìëò>ÄçÉ>ëÑìîëçL
ÄÅÄçÉéç>ìáÑ>ÇéååÄçÉ>ÄçÉ>ëÑìîëçL
2.3 Edit Status Indicators
If the user accepts the entry, then the last digit of the memory number - for the channel
being edited (main or guard) - is changed to subscript.
This indicates that the data for the
channel is in use has changed but is not yet saved to the memory
. The new characteristics
will be used by the radio until the radio is turned off or the channel is changed; at any time
until then, the user has two choices:
ÄÇÇÑèì>ìáÑ>ÇáÄçÜÑí>ÄçÉ>ëÑìîëçL
ÄÅÄçÉéç>ìáÑ>ÇáÄçÜÑí>ÄçÉ>ëÑìîëçL
In either case the pending change character (subscript) will return to full size.
0 0
1
M a i n
D 1 4 4 . 0 0 0 0 R g
G D 2
G u a r d 2
w 1 7 4 . 0 0 0 0 R t
dàÜîëÑ>PKPL>>bàíèãÄò>gçÉàÇÄìàçÜ>Ä>nÑçÉàçÜ>aáÄçÜÑ>éç>ìáÑ>kÄàç>aáÄççÑã
In the display example shown above the Main channel memory number indicates that there
has been a change made that has not yet been saved to the permanent memory.
