TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TSC-4100/4200.4300 92-SC
Installation & Operating Instructions
TiL 92RE125 Rev L
3-7
3.4.3 Switching
OFF
To switch off the transceiver:
(1)
Set the POWER ON/OFF on transceiver to switch to OFF.
(2)
Verify that all indicator LED's on the front panel are OFF.
NOTE
When the transceiver is switched OFF there is no
current drain from external DC.
3.4.4
EXTERNAL DC OPERATION
(1)
Set AC ON/OFF switch to OFF.
(2)
Refer to Table 2-3 for pin numbers and Figure 3.1 for pin locations to hook up external
DC Power.
NOTE
Ensure that the DC source voltage does not
exceed 30 Vdc. The 15 watt and 25 watt units can
operate within the range 21.6 Vdc to 30 Vdc. The
Low power units can operate within the range of
11.5 Vdc to 15.0 Vdc.
Summary of Contents for -92-SC TSC-4100
Page 2: ......
Page 4: ...iiii ...
Page 6: ...iv ...
Page 40: ......
