M-Box NG4E User's Manual
English
4 / 36
tiko Energy Solutions AG
IM-0007-0010 Rev. 2
Package Content
Open the package and check that you have all of the following items:
•
Instructions manual
•
M-Box (
IMAGE 1
)
•
Power cord (
IMAGE 2
)
Depending on the kit, the following
optional items
are included
in addition
:
•
K01-GM-01.0013E-C-ETH-PSF2
o
Power Cord Type J (1
st
from left in
IMAGE 2
)
o
Small power strip with 2 Type F sockets (
IMAGE 3
)
o
5m Ethernet cable (
IMAGE
4
)
•
K02-GM-01.0013E-C-ETH
o
Power Cord Type J (1
st
from left in
IMAGE 2
)
o
5m Ethernet cable (
IMAGE
4
)
If any of the parts are incorrect, missing or damaged, please contact the retailer where
you made your purchase. Keep the carton box, including the original packing materials, in
case you need to return the unit for repair.
Device
IMAGE 1
shows the device.
IMAGE 2
shows various power cords for different countries.
Please note that your country’s power cord
might not be shown here.
On the rear side of the device a label is indicating
•
The manufacturer
•
The device model number (REF) and the current rating
•
The hardware (HW) and firmware (FW) version
•
The unique serial/MAC address as text and as Aztec 2D code (SN/MAC)
Installation
Installing the M-Box
Step 1
Connect the power cord to the M-Box (
IMAGE 7
) and engage the plug
in a free socket. Please see also section
Step 2
Connect the LAN cable to your router (
IMAGE 6
).
Step 3
To
finalize the installation
, all tiko devices must be configured using the
installation app
.
