background image

GO EXPLORE!

7

SAFETY TIPS

 

ALWAYS USE THE HAND STRAP WHEN OPERATING THE STROLLER.

ALWAYS FASTEN SHOULDER STRAPS AND HARNESS TO THE PASSENGER WHEN IN USE.

ALWAYS USE REAR SAFETY PARKING BRAKE WHEN NOT MOVING OR WHEN YOUR TIKE TECH IS PARKED.

ALWAYS CHECK THE CHILDS POSITION AND STRAPS TO INSURE PROPER FITTING.  

ALWAYS CHECK STRAPS AND CHILDS POSITION EACH TIME CHILD IS PLACED IN THE STROLLER. FAILURE TO 
DO SO COULD CAUSE THE CHILD TO SLIP INTO LEG OPENINGS CAUSING SERIOUS INJURY OR DEATH.

ALWAYS BE AWARE OF YOUR CHILD’S POSITION AND COMFORT AND BE AWARE OF YOUR SURROUNDINGS. 

WHEN PLACING YOUR TIKE TECH IN YOUR SUV/TRUCK/CAR, PLEASE TIE IT DOWN.

ALWAYS STORE YOUR STROLLER IN A DRY PLACE

Before every walk check that your tires are properly inflated (for proper amount, check tire side-wall), and that all wheels are rotating 

& properly installed. Check all working parts such as front & back brakes, safety latches, safety straps, canopy movement and that 

the seat is properly & securely inserted. Please do a check every time you & your tikes go for a stroll!

REMEMBER A SAFE RIDE IS THE BEST RIDE !

Good living tip:

Work hard, play much harder. Take vacations & spend lots of safe,adventurous time with your tikes!

TROUBLE SHOOTING:

For answers/solutions to various questions:

Visit our web-site 

tiketech.com

.

See Down Load page heading " TROUBLE SHOOTING "

GO EXPLORE!

Summary of Contents for ATX









Reviews: