www.tiiwee.com
Installation
Mounting the sensor
Mount the sensor to a suitable surface at a minimum height of 1 meter above the ground.
Ensure the sensor area is not blocked. If the sensor is mounted more than 2 meters above
the ground ensure it is aimed downwards towards the area to be monitored. The sensor is
suitable for outdoor use.
Mounting the receiver
The receiver can be mounted to a flat surface in the same manner as the sensor or placed on
a flat surface. The receiver is intended for indoor use only and must not be mounted in an
exposed location.
Using the alarm
•
The received will emit two short tones to indicate it is working.
•
Test the unit by activating the sensor. A second person may be required to listen for
the receiver tone if this is out of hearing range.
•
Switch the volume between low and high settings by pressing the volume button on
the side of the receiver.
Used batteries
Used batteries should not be left in the device as these corrode and can release chemicals,
which are toxic and can damage the device. Remove the batteries from the device if you do
not use it for a longer period of time.
Damaged or used batteries can cause irritation after
contact with skin, always wear suitable gloves and protective glasses. Do not dispose of used
batteries with the household waste, instead hand batteries in at a designated collection
point (dealership or local authority recycling facility).
WARNING!
When choosing a location for
installation, ensure that there
are no cable, cable conduits or
pipes under the surface. Please
do not mount the sensor in
direct sunlight!
