TIGIEFFE Airo V Series, Use And Maintenance Manual

Page: 59 / 103

Use and Maintenance Manual - Series V8 E V10 E Page 59
7.2.4.
Hydraulic filter replacement
All models are equipped with suction filter inside the tank.
It is advisable to replace it at least every two years.
To replace the filtering cartridge:
▪
Stop the machine by pressing the emergency stop
button on the ground control panel.
▪
Disconnect the tubes from the tank.
▪
Unscrew the coupling flange A unlocking the four 5
mm Allen wrench screws.
▪ Unscrew filter B from the suction tube and clean it with
a detergent and a compressed air jet by blowing from
the connection or replace the filtering element.
To restore the initial condition, carry out the above-
mentioned operation in reverse order.
During these operations a quantity of oil may leak out. In
this case remove the oil by means of cloths and by pouring
it into a specific container.
Fig. 21
Replace the filters using only original accessories available at our Technical Support.
Do not re-use used oil and do not leave it in the environment, but dispose of in compliance with local
standards in force.
Once the filters have been replaced, check the hydraulic oil level in the tank.