31
18G 4x2 HDMI Matrix Switcher
Firmware Upgrade
MCU upgrade by USB
Please follow the steps as below to upgrade firmware by the
FW
port on the front panel:
1)
Prepare the latest upgrade file (.APP) and rename it as “
08010000.APP
” on PC.
2) Power off the switcher and connect the
FW
port of switcher to the PC with USB
cable.
3) Power on the switcher, and then the PC will automatically detect a U-disk named of
“BOOTDISK”.
4) Double-click the U-disk, a file named of
“READY.TXT” would be showed.
5)
Directly copy the latest upgrade file (.bin) to the “BOOTDISK” U-disk.
6) Reopen the U-disk to check the filename
“READY.TXT” whether automatically
becomes “SUCCESS.TXT”, if yes, the firmware was updated successfully,
otherwise, the firmware updating is fail, the name of upgrade file (.bin) should be
confirm again, and then follow the above steps to update again.
7) Remove the USB cable after firmware upgrade.
8) After firmware upgrade, the switcher should be restored to factory default by
sending command.
MCU upgrade by Web UI
1) Open the Web UI as described in section
6. GUI Control
and navigate to the tab
Device Settings
.
2) Click on
Browse
and select the MCU firmware file.
3) Click
Update
.
4) After firmware upgrade, the switcher should be restored to factory default by clicking
Factory Reset
.
