For assistance with installation, call us at 507.246.3545
1 - Preparation
q
1.1 - Using a flat screwdriver, depress the three metal tabs holding the seat back to the rear of the cab. There is a tab
located just in from each end of the seat and one in the middle. Pull the seat back forwad, depress the tab, and
pull the seat away from the wall. Repeat for each tab.
q
1.2 - Lean seat back forward and pull up to remove from bottom brackets.
q
2.1 - Tip seat bottom up.
q
2.2 - Pull seat belt receptacles out of elastic strap.
q
2.3 - Pull cover over seat bottom. On 60 portion, pull elastic strap through hole in cover and
run seat belt receptacles back through elastic strap.
q
2.4 - Pull top flap under seat bottom and fasten to velcro on bottom of cover.
2 - Install Seat Bottom Cover
