•
Remove the front cover of the wall marking sticker. Align the back cover of the bell with the wall
marker and stick it onto the wall sticker. Now insert the screws through the back cover and fix the
back cover to the wall.
•
Guide the Doorbell power wires through the center outlet hole so that they reach inside the home
and connect the wires to the power adapter provided (DC 12V). Please take care to ensure that
this connection is done based on color (
Red for POSITIVE “+”, Black for NEGATIVE “
-
”)
. Once this
is done, put on the wire connection terminals and clamp them with pliers.
•
Mount the Doorbell onto the back cover and click it into place.
•
Plug the power adapter which is now connected to the Doorbell, into the power socket and switch
on the power.
•
The Bell Button Ring Light will light up.
•
The hardware installation is completed.
.
Wireless Chime Setup
•
NOTE: THE CHIME CONNECTS WITH THE BELL WIRELESSLY USING RF (RADIO FREQUENCY) AND
NEEDS TO BE IN CLOSE PROXIMITY TO THE SMART BELL (30-50 FEET)
•
Plug the Wireless Chime into any wall socket inside the home. (AC 100V-240V)
•
You can find 2 buttons on the music box as below.
•
To sync the wireless chime with the doorbell, press and hold the
‘
Music
’
switch button for 3 seconds
and it will ring. Then release the button.
•
Immediately press the button on the Doorbell to sync the chime to the bell. If the chime rings, the
chime has been matched with the bell successfully.
