6.
Recording Mode: This option allows you to record the video stream continuously or only on alarm
(when motion is sensed).
Doorbell Reset
In case you have entered an incorrect Wi-Fi password, or have moved your Doorbell to a different location
or you need setup the Doorbell again, please follow the following steps:
1.
Switch off the Home / Office Wi-Fi temporarily
2.
The Doorbell button should start blinking
3.
Press and hold the ‘
Bell
’ button for 5 seconds. The LED indicator will blink fast and will say “Entering
AP mode”
4.
Please go to Step 3 of “Add
Doorbell
to App”. (
Connect the App to the Doorbell
’s Wi
-Fi Hotspot)
5.
If you need to reset the Doorbell to factory defaults, you can press and hold the button for 10
seconds.
6.
Please note that these reset functions will only work when the device is NOT connected to a local
Wi-Fi connection.
