19
Sleep Mode
Sleep mode will turn off the SawGear display when left inactive for a set amount of time.
1. Press
, then
.
2. Enter the number of minutes that SawGear should remain powered up after inactivity.
Note: The smallest value allowed is .25 minutes. Enter a value of 0 to disable sleep mode.
3. Press
to enter the value.
4. Use
to power up SawGear.
Password Protection
SawGear can be password protected to prevent its use by unauthorized persons. Please note that once the
password is set, SawGear cannot be used without it.
1. Remove the power cable from the SawGear PowerHead.
2. Hold the
button.
3. Plug the power cable back into the PowerHead while holding the
button.
4. Press
.
5. Enter any number, between 4 - 8 numbers in length.
6. Press
.
7. Re-enter the password.
8. Press
.
Summary of Contents for SAWGEAR
Page 8: ...8 Attach Support Leg 3 4 5 6 ...
Page 21: ...21 ...
Page 22: ...22 ...
Page 23: ...23 ...
