Please retain instructions for future reference
15
Step 9:
BARGE BOARD & FINIAL INSTALLATION
• Fit Barge Boards to the roof, trapping
overhanging end of the felt in between
to create a weatherproof seal.
• Secure together using 3x 40mm
(N40)
nails per Barge Board.
• Fit soffit boards to the back of the shed as shown using
3x 40mm
(N40)
nails per finial.
(Detail U)
• Fit Finials at the apex point
of the Barge Boards.
Secure together using
2x 40mm
(N40)
nails per finial.
N40
S50
U
S50
Step 9:
COVER LAT & CORNER STRIP INSTALLATION
• Fit Corner Strips in the corners of the shed,
these are plain profiled pieces.
• Secure to the shed using 3x 40mm
(N40)
nails
per Corner Strip.
(Detail V)
• Cut extra supplied piece to length to cover
corners on high side.
• Fit Cover Lats over joints where 2 panels
butt
against each other. These are grooved
both sides.
• Secure to the shed using 3x 40mm
(N40)
nails per Cover Lat.
(Detail W)
NOTE - Cover strips and Cover Lats
may need trimmed to suit.
N40
V
N40
W
N40
COVER
LAT
CORNER
STRIPS
CORNER
STRIPS
CORNER
STRIPS