manualshive.com logo in svg

Tiger SIDE FLAIL, Mounting And Operating Instructions

Share
Download
Tiger SIDE FLAIL Mounting And Operating Instructions Download Page 3

FORWARD

This manual contains information about many features of  the  Tiger mowing

and roadside maintenance equipment.  Some of these include: Safety precautions,
Assembly instructions, Operations, Maintenance and Parts. This manual will also
assist you in the proper break-in, daily care, and troubleshooting of your new
mower.

We recommend that you read carefully the entire manual before operating the

unit.  Also, time spent in becoming fully acquainted with its performance features,
adjustments, and maintenance schedules will be repaid in a long and satisfactory
life of the equipment.

Troubleshooting - Please, before you call, help us to help you!

Please look at the equipment to observe what is happening, then:

•

 Classify the problem

• 

Hydraulic, electrical or mechanical - Read the trouble shooting section

• 

Tractor or Truck chassis - Contact vehicle dealer

•

 If unable to correct the problem yourself, contact your local

 

Tiger Dealer after

   gathering:

• 

Machine model   _______________________

•

 Serial number   ________________________

• 

Dealer name   _________________________

• 

Detailed information about the problem including results of troubleshooting

Attention Owner / Operator / Dealer

:  It is your obligation to read, and understand,

the warranty information section located at  the back of this manual denoting that the
purchaser understands the safety issues relating to this machine and has received
and will read a copy of this manual.

If at any time, you have a service problem with your Tiger mower, Contact

your local dealer for service and parts needed.

MANUFACTURED BY:

DISTRIBUTED BY:

Tiger Corporation

_____________________

3301 N. Louise Ave.

_____________________

Sioux Falls, SD 57107

1-_____-_____-________

1-800-843-6849

1-_____-_____-________

1-605-336-7900
www.tiger-mowers.com

Summary of Contents for SIDE FLAIL













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands